Cable Prep 207 Middlesex Avenue P.O. Box 373 Chester, CT 06412-0373 USA
Phone:1-860-526-4337 Fax:1-860-526-2291 US Toll Free:800-394-4046
Comments or questions are welcome.
SCT-QR stripping/coring tools strip back and bevel the outer conductor, core the dielectric, and strip back the outer jacket on CommScope® Quantum Reach® (QR) cables.
SCT-QR Hardline stripping & coring tools strip back and bevel the outer conductor, core the dielectric, and strip back the outer jacket on CommScope® Quantum Reach® (QR) cables. SCT-QR Hardline stripping & coring tools work on 0.320″ through 1.125″ CommScope® Quantum Reach® (QR) cables.
Note that, because the jacket must be stripped after coring, SCT tools for QR applications include a special, integrated jacket stripper made especially for this purpose.
Three Functions in One Operation:
SCT-QR tools speed connectorization because they strip back and bevel the outer conductor and core the dielectric in one smooth operation.
There is a non-clogging internal stop on every SCT-QR tool that is factory-set to the required dimension for the cable.
Patented Stripping/Coring Blades:
The bevel on the coring edge of the blade self-aligns on the center conductor, which enables an SCT-QR tool to core cable even when it is out-of-round. Made of tool steel that is heat treated to full hardness, the blade bevels the outer conductor, thereby eliminating O-ring damage and minimizing water migration.
Manual or Drill Operation:
SCT tools can be ordered with a standard ergonomic handle or a Cable Prep brand RTH ratchet T-handle. Either handle can be removed for operation with a 3/8-inch variable speed drill.
Attached Jacket Stripping Tool:
Because the jacket on QR cable must be stripped after the coring operation, each SCT-QR stripping/coring tool (labeled SCT-QR-A) comes with a special jacket stripping tool (labeled SCT-QR-B). The two pieces are threaded, so they can be assembled and stored as one unit, which protects the insides of the parts from damage. The jacket stripper is designed with a patented mandrel pin that supports the soft aluminum outer conductor and keeps it from being damaged during the jacket stripping operation.
SCT-QR tools are black anodized aluminum.
FINAL TRIM DIMENSION CROSS-REFERENCE TABLE
SCT-QR tools can be ordered with either a standard handle or a ratchet T-handle. The ratchet T-handle can be removed for use on any Cable Prep brand SCT- and AIO-series tool.
Replacement blade kits include a coring-tool blade, a jacket-stripping blade, screws, a spring washer, and a hex key.
SCT-QR tools include the appropriate jacket stripper. No separate jacket stripper need be ordered.
|Tool with Standard Handle||Tool with Ratchet T-handle||Blade Kit|
|CommScope® Quantum Reach® Cable Size|
|.320 (7 mm) QR||SCT-7MMQR||RSCT-7MMQR||SC-7MMQR|
|320 (7 mm) QR with Corning Gilbert GAF-360-320-QR Crimp Style, Thomas & Betts SNS320QR, or PPC EX320QR connectors||SCT-F320QR*||RSCT-F320QR*||SC-F320QR|
*The HCT/ACT-41Q crimp tool is used for the Corning Gilbert GAF-360-320-QR connector. The PT- or AT-5000UNV-711 TerminX® compression tool is used for the Corning Gilbert GAS320QRP connector, the Thomas & Betts SNS320QR connector, and the PPC320QR connector.
Note that SCT-QR tools include the appropriate jacket stripper. Please see JCS Jacket Strippers for a list of replacement jacket strippers for QR cable.